DynoSW BIKE-01 Motorcycle Dynamometer

Manufacturer
SKU S-61600

  On demand

 

DynoSW BIKE-01 Motorcycle Dynamometer

BIKE - 01 MOTORCYCLE DYNAMOMETER

The DynoSW BIKE-01 dynamometer is designed to control and check the power of motorcycles for diagnostic purposes, and it is especially practical in the case of verification of tuning modifications. measurement of power and torque is carried out by the inertial method (only load from the inertia of the roller). It is equipped with a folding ramp and adjustable front wheel mounting.

Measurement control and data collection are performed by an advanced multi-functional controller. The dyno is delivered fully prepared for measurements - it requires only a 230V power supply and a monitor or TV to be connected.

The dyno is prepared for the possibility of connecting an additional Dyno Force

BOX-ECO Load Module (catalogue number 60299) to extend it to the load version (365 KM).

 

Accurate graphs present:

· engine torque,

· engine power,

· power on wheels,

· air-fuel ratio.

 

The BIKE-05 dynamometer includes:

· Mainframe in form of a fully-welded monocoque steel frame. It has levelling pads and it is covered with aluminium corrugated plates.

· A measuring roller made of a solid bar is mounted in the frame. The roller is precisely balanced, with a deeply knurled surface that increases the wheel traction and is covered with a galvanic coating.

· Front-wheel mounting with adjustable distance from the roll (depending on the motorcycle wheelbase). Approximate range of adjustment: 1150-1750 mm (depending on the size and the distance between the wheels).

· Fastening belts stabilize and protect the motorcycle against damage during the measurement. Belt mounting points are located on the top of the mainframe.

· Controller with built-in measuring system and software (mounted in the main frame). Connection inputs are located on the side of the frame. Portable keyboard and power cables are included.

• Broadband AFR probe and engine rpm sensor.

 

Additional options:

  • cooling fan,
  • monitor or TV set,
  • BOX -ECO load module - upgrade to the load version (365 KM).

 

Basic parameters of the dynamometer

Measurement method

Inertial

Weight

690 kg

Roller dimension

Ø 380x400 mm

Roller weight

410 kg

Maximum speed

400 km/h

Accuracy of measurement

under 1%

Time of measurement

10-15 s

Dimensions (L x W x H)

2200 x 955 x 404 mm
+ramp 2000 mm

Roller balance class

G 2.5 

Power correction standard

SAE J1349

Basic colour

RAL 5005

 

Dynamometer controller parameters

· Base computer 4-core Cortex A72 1.5GHz, 4GB RAM LPDDR4;

· 32GB 100MB / s data memory

· 32-bit RISC 64 MHz microcontroller

 

Transport costs to be agreed individually!

Write Your Own Review
You're reviewing: DynoSW BIKE-01 Motorcycle Dynamometer
Loading...

You submitted your review for moderation.