303 Marine Fabric Guard 946ml

303 Marine Fabric Guard 

Marine Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water-based stains. Spray it on fabric boat covers, awnings, Dacron sails, and more! When applied to clean and dry fabrics, Marine Fabric Guard restores lost water and stain repellency straight from the factory levels. Keep all your favorite fabrics crisp and clean for years to come.

• Safe for synthetic and natural fibers in marine environments
• Protects against both water-based and oil-based stains
• Does not alter fabric color, feel, flammability or breathability
• Recommended by Sunbrella, leading outdoor fabric manufacturer

Additional information:

Product liquid and spray are flammable, keep the product and treated article (until dry) away from heat, sparks, or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.
12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine the need to retreat fabric.

Capacity: 946ml