Nuke Performance Bosch Injector 1462cc 65mm EV14L
Nuke Performance On demand
Nuke Performance Bosch Injector 1462cc 65mm EV14L
Bosch 1462cc / 1500cc injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of fuel rails.
This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).
- High impedance 1462cc injector from Bosch Motorsport
- Commonly referred to as Bosch 1500cc injector
- Corresponding to a Bosch EV14 L injector length
- Filtered top adapter for additional protection
When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.
Bosch Motorsport 1462cc Injector specifications :
| Â Bosch part number | 0280158333 / Bosch -333 |
| Â OEM part number | 0 280 158 333 |
| Â Type - w/o included adapters | 39mm EV14K (Compact) |
| Â Type - with included adapters | 65mm EV14L (Long) |
| Â Connector | Bosch JPT EV1 Minitimer Jetronic |
| Â O-ring top / bottom | 14mm Viton / 14mm Viton |
| Â Resistance | 8.5 ohm |
| Â Volume at 3 BAR | 1462cc/min = 1000g/min = 132lb/hr @ 3bar |
| Â Fuel compatibility | Petrol / Gasoline / E85 / M100 * |
| Â Nozzle / Spray pattern | Regular tip / Single cone spray |
| Â For motorsports use | YES |
| Â Part # / EAN | 130-01-150 / 7340209508291 |
* Note: If using the injector with methanol, flush it with regular fuel after use. Do not leave methanol in the injector for extended periods.
Bosch 1462cc Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.
| Measured peak static flow in a test environment |
|
| Â 2 BAR (29 PSI) | N/A |
| Â 3 BAR (43.5 PSI) | 1450cc / min = 138.1 lb / h |
| Â 4 BAR (58 PSI) | 1690cc / min = 160.9 lb / h |
| Â 5 BAR (78.5 PSI) | 1900cc / min = 180.9 lb / h |
| Â 6 BAR (88 PSI) | N/A |
| Â 7 BAR (101.5 PSI) | N/A |
| Â | Â |
| Â Petrol (10% margin) | Turbo charged | Naturally aspirated |
| Â 1 cyl | 1x197 = 197hp | 1x257 = 257hp |
| Â 4 cyl | 4x197 = 788hp | 4x257 = 1028hp |
| Â 5 cyl | 5x197 = 985hp | 5x257 = 1285hp |
| Â 6 cyl | 6x197 = 1182hp | 6x257 = 1542hp |
| Â 8 cyl | 8x197 = 1576hp | 8x257 = 2056hp |
| Â | Â | Â |
| Â E85 (10% margin) | Turbo charged | Naturally aspirated |
| Â 1 cyl | 1x171 = 171hp | 1x214 = 214hp |
| Â 4 cyl | 4x171 = 684hp | 4x214 = 856hp |
| Â 5 cyl | 5x171 = 855hp | 5x214 = 1070hp |
| Â 6 cyl | 6x171 = 1026hp | 6x214 = 1284hp |
| Â 8 cyl | 8x171 = 1368hp | 8x214 = 1712hp |
Injector calculation :Â The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance.Â
Bosch injector 1462cc, 65mm (EV14L) includes:
- 1 x Bosch Motorsport injector (# 0280158333)
- 1 x Injector adapter 14mm short - with filter (# 135-01-101)
- 1 x Injector adapter 14mm short - without filter (# 135-01-102)
- 1 x Bosch injector clip (# 135-01-005)
Optional flow-matching for optimized performance and consistent fuel delivery for high-performance applications.
We offer all of our injectors as flow-matched in kits of 4, 5, 6, and 8 pcs. Flow-matched injectors ensure consistent fuel delivery, optimizing performance, efficiency, and smoothness. Out-of-the-box injectors may vary in flow, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or tuned engines, where precise fuel delivery is critical.
- Bosch injector 1462cc, 65mm (EV14L), 4pcs flow matched Part # :Â 130-04-150
- Bosch injector 1462cc, 65mm (EV14L), 5pcs flow matched Part # :Â 130-05-150
- Bosch injector 1462cc, 65mm (EV14L), 6pcs flow matched Part # :Â 130-06-150
- Bosch injector 1462cc, 65mm (EV14L), 8pcs flow matched Part # :Â 130-08-150
More Information
| Manufacturer | Nuke Performance |
|---|