Nuke Performance Bosch injector 980cc 65mm EV14L 4pcs flow matched
Nuke Performance
On demand
Nuke Performance Bosch injector 980cc 65mm EV14L 4pcs flow matched
Flow matched Bosch 980cc injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of 4cyl fuel rails.
This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).
- High impedance 980cc injector from Bosch Motorsport
- Corresponding to a Bosch EV14 L injector length
- Kit of x4 flow matched 980cc injectors
- Filtered top adapter for additional protection
When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.
Bosch Motorsport 980cc Injector specifications :
| Bosch part number | 0280158040 / Bosch -040 |
| OEM part number | 0 280 158 040 |
| Type - w/o included adapters | 39mm EV14K (Compact) |
| Type - with included adapters | 65mm EV14L (Long) |
| Connector | Bosch JPT EV1 Minitimer Jetronic |
| O-ring top / bottom | 14mm Viton / 14mm Viton |
| Resistance | 12 ohm |
| Volume at 3 BAR | 980cc/min = 670g/min = 89lb/hr @ 3bar |
| Fuel compatibility | Petrol / Gasoline / E85 / M100 * |
| Nozzle / Spray pattern | Extended tip / Single cone spray |
| For motorsports use | YES |
| Part # / EAN | 130-04-098 / 7340209508338 |
* Note: If using the injector with methanol, flush it with regular fuel after use. Do not leave methanol in the injector for extended periods.
Bosch 980cc Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.
| Measured peak static flow in a test environment |
|
| 2 BAR (29 PSI) | 720cc / min = 69 lb / h |
| 3 BAR (43.5 PSI) | 900cc / min = 86 lb / h |
| 4 BAR (58 PSI) | 1038cc / min = 99 lb / h |
| 5 BAR (78.5 PSI) | 1170cc / min = 111 lb / h |
| 6 BAR (88 PSI) | 1284cc / min = 122 Ib / h |
| 7 BAR (101.5 PSI) | 1344cc / min = 128 lb / h |
| Petrol (10% margin) | Turbo charged | Naturally aspirated |
| 1 cyl | 1x129 = 129hp | 1x168 = 168hp |
| 4 cyl | 4x129 = 516hp | 4x168 = 672hp |
| 5 cyl | 5x129 = 645hp | 5x168 = 840hp |
| 6 cyl | 6x129 = 774hp | 6x168 = 1008hp |
| 8 cyl | 8x129 = 1032hp | 8x168 = 1344hp |
| E85 (10% margin) | Turbo charged | Naturally aspirated |
| 1 cyl | 1x112 = 112hp | 1x140 = 140hp |
| 4 cyl | 4x112 = 448hp | 4x140 = 560hp |
| 5 cyl | 5x112 = 560hp | 5x140 = 700hp |
| 6 cyl | 6x112 = 672hp | 6x140 = 840hp |
| 8 cyl | 8x112 = 896hp | 8x140 = 1120hp |
Injector calculation : The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance.
Bosch injector 980cc, 65mm (EV14L), 4pcs flow matched includes:
- 4 x Bosch Motorsport injector (# 0280158040)
- 4 x Injector adapter 14mm short - with filter (# 135-01-101)
- 4 x Injector adapter 14mm short - without filter (# 135-01-102)
- 4 x Bosch injector clip (# 135-01-005)
- 1 x Flow match certificate
More Information
| Manufacturer |
Nuke Performance
|
|---|