EcuMaster DET 3 + map 4b

Digital ECU Tuner 3 is the successor of the popular digital pigtop ECU Tuner 2.
Thanks to the use of a more powerful processor and 8Mb DataFlash, it was possible to significantly extend the capabilities of the device. The main changes include USB port support, two switchable sets of 4 maps with dimensions 16x16, advanced adaptive ignition input, 4 times more accurate DAC converter, off-line logging to DataFlash memory and many, many more.

Features of the device:
- 4 independent 16x16 maps (fuel map, two PWM maps, ignition map),
- 8 correction maps 16x1,
- 2 independent,
- switchable sets of maps,
- possibility of modifying a single analog signal,
- 4 analog inputs,
- built-in DataFlash enabling logging in without a connected laptop
- power supply measurement,
- the ability to modify the signal of the frequency flow meter (17Hz-4kHz),
- ignition signal service using inductive, Hall and optical sensors as well as signals controlling the ignition module. The device supports both single ended and balanced signals (differential),
- support for many types of ignition: 60-2, 36-2, 36-1, Multitooth, Ignition Modules,
- operation of turbocharger supercharger control valve,
- support for 4 high-resistance injectors (work in the "full group" system),
- parametric ON / OFF output,
- automatic conversion from MAP to MAF with the use of a learning algorithm,
- starting procedure, road dyno,
- calibration capability of any analog sensor, so that analog values ​​can be displayed in their real values ​​(eg signal from the MAP of the sensor in bars, signal from the broadband probe as AFR, etc.),
- the possibility of free firmware upgrade as the device develops (eg new modes of ignition, additional functions),
- communication with the device is carried out using the USB connector
- 24 months warranty for the device

Hardware requirements:

The following minimum configuration is required for correct cooperation with the device

- Windows 2000, XP, Vista, Windows 7
- Screen resolution of at least 1024x768 16bit,
- A processor with a clock of at least 600MHz,
- USB port

The set includes:
- Digital Ecu Tuner 3 device,
- AA USB cable,
- Plug and set of pins for the plug,
- CD with software, drivers and user's instructions in Polish,
- An additional set of resistors and a rectifying diode useful when installing the device.