Nuke Performance Bosch injector 2200cc NGI2 65mm EV14L
Nuke Performance Bosch injector 2200cc NGI2 65mm EV14L
Nuke Performance
On demand
Nuke Performance Bosch injector 2200cc NGI2 65mm EV14L
Bosch 2200cc NGI2 injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of fuel rails.
This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).
- High impedance 2200cc injector from Bosch Motorsport
- Corresponding to a Bosch EV14 L injector length
- Filtered top adapter for additional protection
When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.
Bosch Motorsport 2200cc Injector specifications :
 Bosch part number
0280158829 / Bosch -829
 OEM part number
0 280 158 829 / 2200cc NGI2
 Type - w/o included adapters
53mm EV14S (Standard)
 Type - with included adapters
65mm EV14L (Long)
 Connector
Bosch JPT EV1 Minitimer Jetronic
 O-ring top / bottom
14mm Viton / 14mm Viton
 Resistance
8.5 ohm
 Volume at 3 BAR
980cc/min = 670g/min = 89lb/hr @ 3bar
 Fuel compatibility
Petrol / Gasoline *
 Nozzle / Spray pattern
Regular tip / Single cone spray
 For motorsports use
YES
 Part # / EAN
130-01-220 / 7340209508307
* Note: This injector is made for natural gas (CNG) fuel and is not compatible with E85 or other alcoholic fuel.
Bosch 2200cc NGI2 Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.
 Measured peak static flow in a test environment
 2 BAR (29 PSI)
1800cc / min = 171.4 lb / h
 3 BAR (43.5 PSI)
2200cc / min = 209.5 lb / h
 4 BAR (58 PSI)
2550cc / min = 242.8 lb / h
 5 BAR (78.5 PSI)
2865cc / min = 272.8 lb / h
 6 BAR (88 PSI)
3155cc / min = 300.5 lb / h
 7 BAR (101.5 PSI)
3350cc / min = 319 lb / h
Â
Â
 Petrol (10% margin)
Turbo charged
Naturally aspirated
 1 cyl
1x314 = 314hp
1x377 = 377hp
 4 cyl
4x314 = 1256hp
4x377 = 1508hp
 5 cyl
5x314 = 1570hp
5x377 = 1885hp
 6 cyl
6x314 = 1884hp
6x377 = 2262hp
 8 cyl
8x314 = 2512hp
8x377 = 3016hp
Â
Â
Â
 E85 (10% margin)
Turbo charged
Naturally aspirated
 1 cyl
1x241 = 241hp
1x290 = 290hp
 4 cyl
4x241 = 964hp
4x290 = 1160hp
 5 cyl
5x241 = 1205hp
5x290 = 1450hp
 6 cyl
6x241 = 1446hp
6x290 = 1740hp
 8 cyl
8x241 = 1928hp
8x290 = 2320hp
Injector calculation:Â The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance.Â
Bosch injector 2200cc, 65mm (EV14L) includes:
- 1 x Bosch Motorsport injector (# Bosch -829)
- 1 x Injector adapter 14mm short - with filter (# 135-01-101)
- 1 x Bosch injector clip (# 135-01-005)
Optional flow-matching for optimized performance and consistent fuel delivery for high-performance applications.
We offer all of our injectors as flow-matched in kits of 4, 5, 6, and 8 pcs. Flow-matched injectors ensure consistent fuel delivery, optimizing performance, efficiency, and smoothness. Out-of-the-box injectors may vary in flow, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or tuned engines, where precise fuel delivery is critical.
- Bosch injector 2200cc, 65mm (EV14L), 4pcs flow matched Part # :Â 130-04-220
- Bosch injector 2200cc, 65mm (EV14L), 5pcs flow matched Part # :Â 130-05-220
- Bosch injector 2200cc, 65mm (EV14L), 6pcs flow matched Part # :Â 130-06-220
- Bosch injector 2200cc, 65mm (EV14L), 8pcs flow matched Part # :Â 130-08-220
Bosch 2200cc NGI2 injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of fuel rails.
This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).
- High impedance 2200cc injector from Bosch Motorsport
- Corresponding to a Bosch EV14 L injector length
- Filtered top adapter for additional protection
When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.
Bosch Motorsport 2200cc Injector specifications :
| Â Bosch part number | 0280158829 / Bosch -829 |
| Â OEM part number | 0 280 158 829 / 2200cc NGI2 |
| Â Type - w/o included adapters | 53mm EV14S (Standard) |
| Â Type - with included adapters | 65mm EV14L (Long) |
| Â Connector | Bosch JPT EV1 Minitimer Jetronic |
| Â O-ring top / bottom | 14mm Viton / 14mm Viton |
| Â Resistance | 8.5 ohm |
| Â Volume at 3 BAR | 980cc/min = 670g/min = 89lb/hr @ 3bar |
| Â Fuel compatibility | Petrol / Gasoline * |
| Â Nozzle / Spray pattern | Regular tip / Single cone spray |
| Â For motorsports use | YES |
| Â Part # / EAN | 130-01-220 / 7340209508307 |
* Note: This injector is made for natural gas (CNG) fuel and is not compatible with E85 or other alcoholic fuel.
Bosch 2200cc NGI2 Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.
| Â Measured peak static flow in a test environment |
|
| Â 2 BAR (29 PSI) | 1800cc / min = 171.4 lb / h |
| Â 3 BAR (43.5 PSI) | 2200cc / min = 209.5 lb / h |
| Â 4 BAR (58 PSI) | 2550cc / min = 242.8 lb / h |
| Â 5 BAR (78.5 PSI) | 2865cc / min = 272.8 lb / h |
| Â 6 BAR (88 PSI) | 3155cc / min = 300.5 lb / h |
| Â 7 BAR (101.5 PSI) | 3350cc / min = 319 lb / h |
| Â | Â |
| Â Petrol (10% margin) | Turbo charged | Naturally aspirated |
| Â 1 cyl | 1x314 = 314hp | 1x377 = 377hp |
| Â 4 cyl | 4x314 = 1256hp | 4x377 = 1508hp |
| Â 5 cyl | 5x314 = 1570hp | 5x377 = 1885hp |
| Â 6 cyl | 6x314 = 1884hp | 6x377 = 2262hp |
| Â 8 cyl | 8x314 = 2512hp | 8x377 = 3016hp |
| Â | Â | Â |
| Â E85 (10% margin) | Turbo charged | Naturally aspirated |
| Â 1 cyl | 1x241 = 241hp | 1x290 = 290hp |
| Â 4 cyl | 4x241 = 964hp | 4x290 = 1160hp |
| Â 5 cyl | 5x241 = 1205hp | 5x290 = 1450hp |
| Â 6 cyl | 6x241 = 1446hp | 6x290 = 1740hp |
| Â 8 cyl | 8x241 = 1928hp | 8x290 = 2320hp |
Injector calculation:Â The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance.Â
Bosch injector 2200cc, 65mm (EV14L) includes:
- 1 x Bosch Motorsport injector (# Bosch -829)
- 1 x Injector adapter 14mm short - with filter (# 135-01-101)
- 1 x Bosch injector clip (# 135-01-005)
Optional flow-matching for optimized performance and consistent fuel delivery for high-performance applications.
We offer all of our injectors as flow-matched in kits of 4, 5, 6, and 8 pcs. Flow-matched injectors ensure consistent fuel delivery, optimizing performance, efficiency, and smoothness. Out-of-the-box injectors may vary in flow, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or tuned engines, where precise fuel delivery is critical.
- Bosch injector 2200cc, 65mm (EV14L), 4pcs flow matched Part # :Â 130-04-220
- Bosch injector 2200cc, 65mm (EV14L), 5pcs flow matched Part # :Â 130-05-220
- Bosch injector 2200cc, 65mm (EV14L), 6pcs flow matched Part # :Â 130-06-220
- Bosch injector 2200cc, 65mm (EV14L), 8pcs flow matched Part # :Â 130-08-220
More Information
Manufacturer
Nuke Performance
| Manufacturer |
Nuke Performance
|
|---|