Wilwood 160-4766 Drilled Steel Dynamic Mount Rotor 12.9
Wilwood 160-4766 Drilled Steel Dynamic Mount Rotor 12.9
Wilwood
On demand
Wilwood 160-4766 Drilled Steel Dynamic Mount Rotor 12.9
Drilled Steel Dynamic Mount Rotor
Steel rotors have applications in all types of motorsports. Steel rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. This could be anything from a hard stopping drag race car at the end of a quarter mile, or a high speed stock car coming in from a qualifier at a super speedway. Steel rotors can also be found in lighter weight open wheel cars such as sprints and modifieds, and a variety of light weight, open wheel road course racers. A special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads
Performance Characteristics
- Suitable applications: Drag / Dirt racing
- Not for street use.
Rotor Dimensions
Width (in)
0.38
Diameter (in)
12.90
Mount Side
Non_Direct
Rotor Design
Material
Steel
Vane Count
Solid
Weight(Lbs)
5.70
Rotor Style & Finish
Type
Solid
Style
Drilled
Surface Finish
Black Electro Coat
Rotor Upgrades
Burnished
No
Balanced
No
Vehicle Applications
Driving Environment
Vehicle Sub-Types
Application Duty
Stock Cars
NASCAR, BGN, CTS, ARCA, etc...
Light Duty
Drag Racing
Heavy Duty
Industrial
Light Duty
Additional Notes
Dynamic mounting is the most effective method of eliminating all types of thermal stress and distortion in steel rotor applications. These rotors are machined with mounting slots that are used with special t-nuts and bolt kits. This mounting system allows the rotor to expand and contract independently of the mounting hat or hub as the rotor goes through temperature changes. This eliminates all strain or bind at the mounting points. The rotors run truer, last longer, and all undo stress on the hats or hubs is eliminated. Dynamic mounting is preferred in all applications where temporary, but extreme temperature spikes may cause high expansion rates in the steel.
Wilwood also offers slotted dynamic mount hats and plates that are used to provide "float" with a standard hole mount rotor, but the rotors in this category are machined for use on "fixed" mounts that require the "float" to be placed within the rotor itself.
Drilled Steel Dynamic Mount Rotor
Steel rotors have applications in all types of motorsports. Steel rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. This could be anything from a hard stopping drag race car at the end of a quarter mile, or a high speed stock car coming in from a qualifier at a super speedway. Steel rotors can also be found in lighter weight open wheel cars such as sprints and modifieds, and a variety of light weight, open wheel road course racers. A special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads
Performance Characteristics
- Suitable applications: Drag / Dirt racing
- Not for street use.
Rotor Dimensions
| Width (in) | 0.38 |
| Diameter (in) | 12.90 |
| Mount Side | Non_Direct |
Rotor Design
| Material | Steel |
| Vane Count | Solid |
| Weight(Lbs) | 5.70 |
Rotor Style & Finish
| Type | Solid |
| Style | Drilled |
| Surface Finish | Black Electro Coat |
Rotor Upgrades
| Burnished | No |
| Balanced | No |
Vehicle Applications
| Driving Environment | Vehicle Sub-Types | Application Duty |
| Stock Cars | NASCAR, BGN, CTS, ARCA, etc... | Light Duty |
| Drag Racing | Heavy Duty | |
| Industrial | Light Duty |
Additional Notes
Dynamic mounting is the most effective method of eliminating all types of thermal stress and distortion in steel rotor applications. These rotors are machined with mounting slots that are used with special t-nuts and bolt kits. This mounting system allows the rotor to expand and contract independently of the mounting hat or hub as the rotor goes through temperature changes. This eliminates all strain or bind at the mounting points. The rotors run truer, last longer, and all undo stress on the hats or hubs is eliminated. Dynamic mounting is preferred in all applications where temporary, but extreme temperature spikes may cause high expansion rates in the steel.
Wilwood also offers slotted dynamic mount hats and plates that are used to provide "float" with a standard hole mount rotor, but the rotors in this category are machined for use on "fixed" mounts that require the "float" to be placed within the rotor itself.
More Information
Manufacturer
Wilwood
| Manufacturer |
Wilwood
|
|---|