Flow matched Bosch 980cc injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of 4cyl fuel rails.

This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).

• High impedance 980cc injector from Bosch Motorsport
  
• Corresponding to a Bosch EV14 L injector length
  
• Kit of x4 flow matched 980cc injectors
  
• Filtered top adapter for additional protection

When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.

Bosch Motorsport 980cc Injector specifications :

* Note: If using the injector with methanol, flush it with regular fuel after use. Do not leave methanol in the injector for extended periods.

Bosch 980cc Injector capacity :

Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.

Injector calculation : The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance.

Bosch injector 980cc, 65mm (EV14L), 4pcs flow matched includes:

• 4 x Bosch Motorsport injector (# 0280158040)
• 4 x Injector adapter 14mm short - with filter (# 135-01-101)
• 4 x Injector adapter 14mm short - without filter (# 135-01-102)
• 4 x Bosch injector clip (# 135-01-005)
• 1 x Flow match certificate