Metal Guard Synthetic Premium 0W-30 Engine Oil 5L VW 504.00 507.00 Longlife ACEA C3 API SM CF

Metal Guard Synthetic Premium 0W-30 is a high-quality, multigrade, fully synthetic engine oil designed for modern and demanding power units.

The product has been developed using Low SAPS technology and can be used in petrol and diesel engines, including units installed in VW Group vehicles such as Volkswagen, Audi, Seat and Skoda. The oil is also suitable for engines meeting the EURO 4 emission standard, provided that it complies with the vehicle manufacturer’s requirements.

Carefully selected synthetic base oils and a low-ash additive package help protect the exhaust system, DPF, FAP and GPF particulate filters, as well as catalytic converters.

Key properties

Protection during cold starts

A pour point of -40°C and dynamic viscosity of 6000 mPa·s at -35°C ensure rapid oil circulation after engine start.

Suitable fluidity at low temperatures supports immediate lubrication of the most important engine components and helps reduce wear occurring during cold starts.

Longlife technology

The oil is intended for vehicles in which the manufacturer permits extended oil change intervals.

The formula helps maintain protective properties throughout the entire service period specified by the vehicle manufacturer.

Filter protection and engine cleanliness

The Low SAPS formula with a sulphated ash content of 0.79% by weight helps reduce the risk of DPF, FAP and GPF filter blockage.

Its detergent and dispersant properties support engine cleanliness and help reduce the formation of high-temperature deposits, carbon build-up and sludge.

Fuel economy and friction reduction

Low viscosity and anti-wear properties help reduce internal engine friction.

This may support lower fuel consumption and reduced exhaust emissions while maintaining an appropriate level of protection for engine components.

High thermal stability

A flash point of 230°C and resistance to shearing help maintain a durable oil film during operation at high temperatures and under heavy engine loads.

The oil provides stable lubrication properties during intensive use.

Versatile application and miscibility

Metal Guard Synthetic Premium 0W-30 can be used in:

• petrol engines,

• diesel engines,

• naturally aspirated engines,

• turbocharged engines,

• multi-valve engines,

• engines equipped with unit injectors,

• LPG-powered engines,

• engines equipped with DPF, FAP or GPF filters,

• engines equipped with catalytic converters.

The oil is miscible with other oils of a similar viscosity category.

To maintain the full properties of the product, it is recommended to use it in accordance with the vehicle manufacturer’s requirements.

Application

The oil is recommended for:

• modern passenger cars,

• light commercial vehicles,

• petrol engines,

• diesel engines,

• vehicles requiring ACEA C3 oil,

• vehicles requiring API SM or CF oil,

• vehicles requiring VW 504.00 or VW 507.00,

• vehicles requiring BMW Longlife-04,

• vehicles requiring Porsche C30.

The product is particularly recommended for Volkswagen, Audi, Seat, Skoda, BMW and Porsche vehicles, provided that the vehicle manufacturer requires one of the listed standards or specifications.

Before use, check the vehicle manual to confirm that the manufacturer recommends SAE 0W-30 oil and the relevant quality standards.

Product specification

• Brand: Metal Guard

• Model: Synthetic Premium Longlife

• Oil type: fully synthetic

• SAE viscosity grade: 0W-30

• ACEA classification: C3

• API classification: SM / CF

• Package capacity: 5 L

• Intended use: passenger cars and commercial vehicles

• EAN: 5906530922681

Specifications and approvals

• SAE 0W-30

• ACEA C3

• API SM / CF

• VW 504.00

• VW 507.00

• BMW Longlife-04

• Porsche C30

International classifications

SAE 0W-30

A multigrade viscosity grade providing suitable fluidity during cold starts and stable lubrication properties at normal engine operating temperatures.

ACEA C3

A European classification for low-ash oils intended for modern engines equipped with exhaust gas aftertreatment systems, including particulate filters and catalytic converters.

API SM / CF

An American quality classification intended respectively for petrol and diesel engines.

OEM standards and approvals

Volkswagen Audi Seat Skoda

VW 504.00 – a standard intended for petrol engines. It includes and exceeds the following previous standards:

• VW 500.00

• VW 501.00

• VW 501.01

• VW 502.00

• VW 503.00

• VW 503.01

VW 507.00 – a standard intended for diesel engines equipped with a DPF filter. It includes and exceeds the following previous standards:

• VW 505.00

• VW 505.01

• VW 506.00

• VW 506.01

BMW

BMW Longlife-04 – a specification for modern petrol and diesel engines requiring low-ash oil.

Porsche

Porsche C30 – a specification intended for selected Porsche engines requiring suitable low-ash properties and extended oil change intervals.

Physicochemical parameters

• Kinematic viscosity at 100°C: 10.20 mm²/s

• Viscosity index: 160

• Dynamic viscosity at -35°C: 6000 mPa·s

• Flash point COC: 230°C

• Pour point: -40°C

• Total Base Number TBN: 8.0 mg KOH/g

• Sulphated ash: 0.79% by weight

Why choose Metal Guard Synthetic Premium 0W-30?

• fully synthetic formula,

• Low SAPS technology,

• Longlife technology,

• compliance with ACEA C3,

• API SM / CF classification,

• compliance with VW 504.00 and VW 507.00,

• compliance with BMW Longlife-04,

• compliance with Porsche C30,

• protection of DPF, FAP and GPF filters,

• protection of catalytic converters,

• rapid lubrication during cold starts,

• pour point of -40°C,

• thermal stability under heavy loads,

• supports engine cleanliness,

• helps reduce high-temperature deposits,

• intended for petrol and diesel engines,

• suitable for turbocharged, naturally aspirated and LPG-powered engines,

• 5 L capacity.

Metal Guard Synthetic Premium 0W-30 is a fully synthetic engine oil designed for modern passenger cars and light commercial vehicles. The Low SAPS formula supports the protection of the engine, particulate filters and catalytic converters, while the 0W-30 viscosity grade ensures suitable fluidity at low temperatures.