Before fitting, please ensure that the spacer fits flat against the rear of the wheel. After fitting, also check the clearance at the wheel arch if the right and left wheels are completely locked.

These spacers are centered on the hub.

These CNC-machined precision alloy wheel spacers have a thickness of 11 mm, a bore of 66.5 mm and a 5-stud bolt pattern for 100 and 112 mm PCD mounts. The spacers are black anodized to prevent corrosion and sticking to the wheel or hub, and are machined with an alloy pin to allow centering on the hub. They are machined with an alloy lug to allow centering on the hub (often called "hubcentric" spacers). Spacers are suitable for most vehicles produced by the Volkswagen group. An 11 mm spacer gives an overall track increase of 22 mm when fitted to both sides of an axle.

Please note: Our 11mm, 16mm and 20mm spacers will NOT work on the rear wheels of MK3 VW 5x100 applications due to the longer center hub. There is no problem with the smaller 3mm, 5mm and 8mm spacers not centered on the hub.

Extended wheel bolts are not supplied.

Sold in pairs.