CANchecked Multi Function Display MFD32 GEN2 for BMW G20 G21 G22 G23 G26 G42 G80 G81 G82 G83 G87 LCI 2 LHD preassembled
CANchecked Multi Function Display MFD32 GEN2 for BMW G20 G21 G22 G23 G26 G42 G80 G81 G82 G83 G87 LCI 2 LHD preassembled
CANchecked MFD32 Gen2 for BMW G20/G21/G22/G23/G26 G42 G80/G81/G82/G83/G87 LCI 2 – OEM Integration with All Your Vehicle Data at a Glance
The vehicle-specific CANchecked MFD32 Gen2 transforms the original air vent of your BMW G20/G21/G22/G23/G26 G42 G80/G81/G82/G83/G87 LCI 2 (2nd Facelift) into an intelligent performance display. The display is supplied pre-installed in an original BMW air vent, ensuring a perfect OEM appearance with no visible modifications or trimming required.
Our displays are designed for easy installation and can be fitted by virtually anyone. For most vehicle models, a detailed illustrated installation guide is available, allowing you to install your display without visiting a workshop.
Key Features
- OEM BMW Integration: Delivered pre-installed in an original BMW air vent for the BMW G81/G87 LCI 2
- Perfect Fit: The vehicle-specific vent retains full airflow around the display
- CAN Bus Communication: Read advanced vehicle data comparable to manufacturer diagnostic tools
- Gear Display: Directly via CAN Bus or calculated from vehicle speed and engine RPM
- Touchscreen: Intuitive swipe navigation between pages
- Fully Customizable: Create your own pages, upload custom images and boot animations
- Additional Inputs: Connect up to four analog sensors plus one ethanol sensor directly to the display
- CAN Switching: Use the display as a keypad and transmit custom CAN messages
- Custom Alarms: Configure personalized warnings, for example when exhaust gas temperature exceeds a defined limit
- Data Logging: Store measurement data on the integrated SD card for later analysis
- Performance Meter: Measure 0–100 km/h, 100–200 km/h and 0–200 km/h acceleration times without additional hardware
- DTC Functions*: Read and clear fault codes from the engine, transmission, ABS and AWD systems
- Automatic Dimming*: Display brightness adjusts automatically with the vehicle's instrument lighting
Display Views
Create your own layouts or choose from a variety of preconfigured pages.
- Comes with several ready-to-use example layouts
- Create your own custom pages
- Supports up to ten display pages
- 20 different widget types including gauges, digital values, bar graphs, tachometers and charts
- Widgets are freely scalable and positioned via drag & drop
- Completely customizable colors
- Up to 64 widgets per page
Display Setup Software (DSS)
The CANchecked Display Setup Software (DSS) allows complete customization of your display. Download and analyze log files with the integrated Log Viewer, record CAN traffic using the built-in CAN Logger and configure sensors through the powerful TRI Editor. Rename sensors, define warning limits and adjust parameters for both CAN Bus and analog inputs.
Supported Vehicle Data
One of the most common questions is: Which values can be read from the ECU?
The answer is simple: Almost every available diagnostic value.
CANchecked has reverse-engineered communication protocols for numerous engine control units, allowing access to extensive manufacturer-specific vehicle data using UDS, TP2, proprietary CAN protocols and ISO 9141.
Your display is delivered with pre-configured TRI/TRX files containing all supported sensors for your specific engine.
Temperatures
- Exhaust Gas Temperature (EGT)
- Coolant Temperature
- Engine Oil Temperature
- Intake Air Temperature
- Ambient Temperature
- Fuel Temperature
- Transmission Temperature (DCT/DSG)
Pressures
- Boost Pressure
- Ambient Pressure
- Low Fuel Pressure
- Fuel Rail Pressure (Actual / Target)
Lambda / Fuel Mixture
- Lambda Value
- Injection Time
- Short-Term Fuel Trim
- Long-Term Fuel Trim
Additional Values
- Engine RPM
- Mass Air Flow
- Vehicle Speed
- Throttle Position
- Ignition Timing
- Ignition Retard per Cylinder
- Wastegate Duty Cycle
- Battery Voltage
- Engine Torque
- Current Gear
- Various diesel-specific parameters
If additional values are required, they can be added later.
Package Contents
- CANchecked MFD32 Gen2 display pre-installed in an original BMW air vent for the BMW G81/G87 LCI 2 (2nd Facelift)
- Vehicle-specific wiring harness
- Quick Start Guide
- USB data cable
- Pre-installed SD card
- SD card adapter
- Anti-reflection display film
Connections & Expansion
The four analog inputs support both 0–5 V linear sensors and NTC temperature sensors.
The following CANchecked sensors are already configured in the supplied TRI/TRX files:
- AIN1: NTC01 Temperature Sensor
- AIN2: TCC01 Type-K Thermocouple Interface
- AIN3: FLP01 0–10 bar Pressure Sensor
- AIN4: BST10 0–5.5 bar Absolute Boost Pressure Sensor
An optional pre-assembled analog wiring harness is available for easy installation.
You can also connect the optional external 8-LED Shift Light Module. LED colors and RPM thresholds are configured directly on the display.
An ethanol sensor can be connected directly to the display using a 10 kΩ pull-up resistor between the 5 V supply and signal line. Ethanol content and fuel temperature can then be displayed and logged.
Advanced Features
Math Channels allow sensor values to be combined using custom calculations, while User Tables enable the creation of additional virtual sensors using 2D and 3D lookup tables.
Optional Accessories
- CC24000 SLM08 – External Shift Light Module
- CC22780 ANC04 – 4-Channel Analog Input Harness (300 cm)
- CC22100 CBD08 – 8-Port CAN Distribution Hub
- CC22902 NTC01 – 1/8" NPT Temperature Sensor
- CC22903 TCC01 – Type-K Thermocouple Converter (up to 1250°C)
- CC22901 FLP01 – 0–10 bar Pressure Sensor
- CC22900 BST10 – 6.5 bar Relative Pressure Sensor
* Available only with supported vehicle protocols.
CANchecked MFD32 Gen2 for BMW G20/G21/G22/G23/G26 G42 G80/G81/G82/G83/G87 LCI 2 – OEM Integration with All Your Vehicle Data at a Glance
The vehicle-specific CANchecked MFD32 Gen2 transforms the original air vent of your BMW G20/G21/G22/G23/G26 G42 G80/G81/G82/G83/G87 LCI 2 (2nd Facelift) into an intelligent performance display. The display is supplied pre-installed in an original BMW air vent, ensuring a perfect OEM appearance with no visible modifications or trimming required.
Our displays are designed for easy installation and can be fitted by virtually anyone. For most vehicle models, a detailed illustrated installation guide is available, allowing you to install your display without visiting a workshop.
Key Features
- OEM BMW Integration: Delivered pre-installed in an original BMW air vent for the BMW G81/G87 LCI 2
- Perfect Fit: The vehicle-specific vent retains full airflow around the display
- CAN Bus Communication: Read advanced vehicle data comparable to manufacturer diagnostic tools
- Gear Display: Directly via CAN Bus or calculated from vehicle speed and engine RPM
- Touchscreen: Intuitive swipe navigation between pages
- Fully Customizable: Create your own pages, upload custom images and boot animations
- Additional Inputs: Connect up to four analog sensors plus one ethanol sensor directly to the display
- CAN Switching: Use the display as a keypad and transmit custom CAN messages
- Custom Alarms: Configure personalized warnings, for example when exhaust gas temperature exceeds a defined limit
- Data Logging: Store measurement data on the integrated SD card for later analysis
- Performance Meter: Measure 0–100 km/h, 100–200 km/h and 0–200 km/h acceleration times without additional hardware
- DTC Functions*: Read and clear fault codes from the engine, transmission, ABS and AWD systems
- Automatic Dimming*: Display brightness adjusts automatically with the vehicle's instrument lighting
Display Views
Create your own layouts or choose from a variety of preconfigured pages.
- Comes with several ready-to-use example layouts
- Create your own custom pages
- Supports up to ten display pages
- 20 different widget types including gauges, digital values, bar graphs, tachometers and charts
- Widgets are freely scalable and positioned via drag & drop
- Completely customizable colors
- Up to 64 widgets per page
Display Setup Software (DSS)
The CANchecked Display Setup Software (DSS) allows complete customization of your display. Download and analyze log files with the integrated Log Viewer, record CAN traffic using the built-in CAN Logger and configure sensors through the powerful TRI Editor. Rename sensors, define warning limits and adjust parameters for both CAN Bus and analog inputs.
Supported Vehicle Data
One of the most common questions is: Which values can be read from the ECU?
The answer is simple: Almost every available diagnostic value.
CANchecked has reverse-engineered communication protocols for numerous engine control units, allowing access to extensive manufacturer-specific vehicle data using UDS, TP2, proprietary CAN protocols and ISO 9141.
Your display is delivered with pre-configured TRI/TRX files containing all supported sensors for your specific engine.
Temperatures
- Exhaust Gas Temperature (EGT)
- Coolant Temperature
- Engine Oil Temperature
- Intake Air Temperature
- Ambient Temperature
- Fuel Temperature
- Transmission Temperature (DCT/DSG)
Pressures
- Boost Pressure
- Ambient Pressure
- Low Fuel Pressure
- Fuel Rail Pressure (Actual / Target)
Lambda / Fuel Mixture
- Lambda Value
- Injection Time
- Short-Term Fuel Trim
- Long-Term Fuel Trim
Additional Values
- Engine RPM
- Mass Air Flow
- Vehicle Speed
- Throttle Position
- Ignition Timing
- Ignition Retard per Cylinder
- Wastegate Duty Cycle
- Battery Voltage
- Engine Torque
- Current Gear
- Various diesel-specific parameters
If additional values are required, they can be added later.
Package Contents
- CANchecked MFD32 Gen2 display pre-installed in an original BMW air vent for the BMW G81/G87 LCI 2 (2nd Facelift)
- Vehicle-specific wiring harness
- Quick Start Guide
- USB data cable
- Pre-installed SD card
- SD card adapter
- Anti-reflection display film
Connections & Expansion
The four analog inputs support both 0–5 V linear sensors and NTC temperature sensors.
The following CANchecked sensors are already configured in the supplied TRI/TRX files:
- AIN1: NTC01 Temperature Sensor
- AIN2: TCC01 Type-K Thermocouple Interface
- AIN3: FLP01 0–10 bar Pressure Sensor
- AIN4: BST10 0–5.5 bar Absolute Boost Pressure Sensor
An optional pre-assembled analog wiring harness is available for easy installation.
You can also connect the optional external 8-LED Shift Light Module. LED colors and RPM thresholds are configured directly on the display.
An ethanol sensor can be connected directly to the display using a 10 kΩ pull-up resistor between the 5 V supply and signal line. Ethanol content and fuel temperature can then be displayed and logged.
Advanced Features
Math Channels allow sensor values to be combined using custom calculations, while User Tables enable the creation of additional virtual sensors using 2D and 3D lookup tables.
Optional Accessories
- CC24000 SLM08 – External Shift Light Module
- CC22780 ANC04 – 4-Channel Analog Input Harness (300 cm)
- CC22100 CBD08 – 8-Port CAN Distribution Hub
- CC22902 NTC01 – 1/8" NPT Temperature Sensor
- CC22903 TCC01 – Type-K Thermocouple Converter (up to 1250°C)
- CC22901 FLP01 – 0–10 bar Pressure Sensor
- CC22900 BST10 – 6.5 bar Relative Pressure Sensor
* Available only with supported vehicle protocols.