Forte Off-car DPF Cleaner professional DPF FAP GPF CAT off-vehicle cleaning 500ml
Forte Off-car DPF Cleaner professional DPF FAP GPF CAT off-vehicle cleaning 500ml
Forte
On demand
Forte Off-car DPF Cleaner professional DPF FAP GPF CAT off-vehicle cleaning 500ml
OFF-CAR DPF CLEANER J07010 Professional DPF FAP GPF CAT Cleaner for Off-Vehicle Cleaning
OFF-CAR DPF CLEANER J07010 is a professional, fast-acting foam cleaner designed for cleaning DPF, FAP and GPF particulate filters as well as catalytic converters after they have been completely removed from the vehicle.
The product has been specially developed to effectively remove excessive soot deposits from particulate filters. The cleaning process takes approximately 60 minutes and helps restore the correct operation of the exhaust aftertreatment system, vehicle performance and throttle response.
The product is intended exclusively for professional use and is not intended for retail sale.
Key properties
Effective soot removal
The fast-acting cleaning foam helps remove excessive soot accumulation from DPF, FAP and GPF filters as well as catalytic converters.
The product is applied against the direction of exhaust gas flow, allowing contaminants accumulated inside the filter to be effectively loosened and rinsed out.
Off-vehicle cleaning
The product is intended for use only after the filter or catalytic converter has been completely removed from the vehicle.
This method of application allows the cleaner to be applied thoroughly and the loosened contaminants to be rinsed out with hot water.
Fast action
The cleaning process takes approximately 60 minutes. After application, leave the product for 20 minutes or until visible breakthrough of the cleaner occurs.
For heavily blocked filters, two containers of the product may be required.
Helps avoid costly replacement
Effective removal of deposits may help restore correct particulate filter operation and reduce the risk of costly replacement.
The product also helps reduce vehicle downtime and enables a faster return to service.
Helps restore vehicle performance
Excessive filter blockage may restrict exhaust gas flow and negatively affect engine operation. Cleaning helps restore proper vehicle response and performance.
Application
OFF-CAR DPF CLEANER J07010 is intended for professional off-vehicle cleaning of:
-
DPF filters,
-
FAP filters,
-
GPF filters,
-
catalytic converters,
-
particulate filters with excessive soot accumulation.
The product must only be used after the component being cleaned has been completely removed from the vehicle.
Directions for use
-
Completely remove the DPF, FAP, GPF or catalytic converter from the vehicle.
-
Position the filter vertically with the rear section facing upwards.
-
Apply the product against the direction of exhaust gas flow.
-
Leave for 20 minutes or until visible breakthrough of the cleaner occurs.
-
For heavily blocked filters, use two containers if necessary.
-
Rinse thoroughly with 3 litres of hot water.
-
Gently dry with compressed air before refitting.
-
Refit the filter in the vehicle.
-
Bring the vehicle up to operating temperature.
-
Carry out regeneration if required.
Key benefits
-
removes excessive soot accumulation,
-
helps restore correct operation of DPF, FAP, GPF and catalytic converters,
-
fast-acting foam formula,
-
cleans in approximately 60 minutes,
-
helps avoid costly filter replacement,
-
reduces vehicle downtime,
-
supports a quick return to service,
-
helps restore vehicle performance and response,
-
intended for off-vehicle cleaning.
Safety information
Use only in a well-ventilated area.
The manufacturer accepts no responsibility for damage resulting from improper use of the product.
Use the product in accordance with the instructions provided. Before starting work, completely remove the component being cleaned from the vehicle.
Additional information
-
Product name: OFF-CAR DPF CLEANER
-
Product code: J07010
-
Product type: professional foam cleaner for particulate filters and catalytic converters
-
Method of use: off-vehicle cleaning
-
Cleaning time: approximately 60 minutes
-
Product contact time: 20 minutes or until visible breakthrough
-
Rinsing water quantity: 3 litres of hot water
-
Intended use: DPF, FAP, GPF, catalytic converters
Important
FOR PROFESSIONAL USE ONLY.
NOT FOR RETAIL SALE.
OFF-CAR DPF CLEANER J07010 Professional DPF FAP GPF CAT Cleaner for Off-Vehicle Cleaning
OFF-CAR DPF CLEANER J07010 is a professional, fast-acting foam cleaner designed for cleaning DPF, FAP and GPF particulate filters as well as catalytic converters after they have been completely removed from the vehicle.
The product has been specially developed to effectively remove excessive soot deposits from particulate filters. The cleaning process takes approximately 60 minutes and helps restore the correct operation of the exhaust aftertreatment system, vehicle performance and throttle response.
The product is intended exclusively for professional use and is not intended for retail sale.
Key properties
Effective soot removal
The fast-acting cleaning foam helps remove excessive soot accumulation from DPF, FAP and GPF filters as well as catalytic converters.
The product is applied against the direction of exhaust gas flow, allowing contaminants accumulated inside the filter to be effectively loosened and rinsed out.
Off-vehicle cleaning
The product is intended for use only after the filter or catalytic converter has been completely removed from the vehicle.
This method of application allows the cleaner to be applied thoroughly and the loosened contaminants to be rinsed out with hot water.
Fast action
The cleaning process takes approximately 60 minutes. After application, leave the product for 20 minutes or until visible breakthrough of the cleaner occurs.
For heavily blocked filters, two containers of the product may be required.
Helps avoid costly replacement
Effective removal of deposits may help restore correct particulate filter operation and reduce the risk of costly replacement.
The product also helps reduce vehicle downtime and enables a faster return to service.
Helps restore vehicle performance
Excessive filter blockage may restrict exhaust gas flow and negatively affect engine operation. Cleaning helps restore proper vehicle response and performance.
Application
OFF-CAR DPF CLEANER J07010 is intended for professional off-vehicle cleaning of:
-
DPF filters,
-
FAP filters,
-
GPF filters,
-
catalytic converters,
-
particulate filters with excessive soot accumulation.
The product must only be used after the component being cleaned has been completely removed from the vehicle.
Directions for use
-
Completely remove the DPF, FAP, GPF or catalytic converter from the vehicle.
-
Position the filter vertically with the rear section facing upwards.
-
Apply the product against the direction of exhaust gas flow.
-
Leave for 20 minutes or until visible breakthrough of the cleaner occurs.
-
For heavily blocked filters, use two containers if necessary.
-
Rinse thoroughly with 3 litres of hot water.
-
Gently dry with compressed air before refitting.
-
Refit the filter in the vehicle.
-
Bring the vehicle up to operating temperature.
-
Carry out regeneration if required.
Key benefits
-
removes excessive soot accumulation,
-
helps restore correct operation of DPF, FAP, GPF and catalytic converters,
-
fast-acting foam formula,
-
cleans in approximately 60 minutes,
-
helps avoid costly filter replacement,
-
reduces vehicle downtime,
-
supports a quick return to service,
-
helps restore vehicle performance and response,
-
intended for off-vehicle cleaning.
Safety information
Use only in a well-ventilated area.
The manufacturer accepts no responsibility for damage resulting from improper use of the product.
Use the product in accordance with the instructions provided. Before starting work, completely remove the component being cleaned from the vehicle.
Additional information
-
Product name: OFF-CAR DPF CLEANER
-
Product code: J07010
-
Product type: professional foam cleaner for particulate filters and catalytic converters
-
Method of use: off-vehicle cleaning
-
Cleaning time: approximately 60 minutes
-
Product contact time: 20 minutes or until visible breakthrough
-
Rinsing water quantity: 3 litres of hot water
-
Intended use: DPF, FAP, GPF, catalytic converters
Important
FOR PROFESSIONAL USE ONLY.
NOT FOR RETAIL SALE.
More Information
Manufacturer
Forte
Volume
251-500ml
| Manufacturer |
Forte
|
|---|---|
| Volume | 251-500ml |