KinematicGP GP52 Long Life engine and gear oil additive with graphene protects and regenerates engine 10ml
KinematicGP GP52 Long Life engine and gear oil additive with graphene protects and regenerates engine 10ml
On demand
KinematicGP GP52 Long Life engine and gear oil additive with graphene protects and regenerates engine 10ml
KinematicGP GP52 Long Life is an advanced engine and gear oil additive developed to reduce friction, limit wear and provide long-lasting protection for components operating under high load.
The formula uses graphene nanotechnology and active nano-bearing structures to support the protection of friction surfaces in engines, manual gearboxes, drive axles and differentials. The oil acts as a carrier, while the protective layer forms directly on metal surfaces, especially in areas exposed to the highest friction, pressure and temperature.
GP52 Long Life does not thicken the oil, dilute it or change its viscosity grade. It can be used with mineral, semi-synthetic and synthetic oils, including modern low-viscosity oils.
Key product features
- Supports friction reduction between metal components
- Helps limit mechanical wear of friction surfaces
- Creates an adaptive DLGCâ„¢ protective layer
- May improve engine running smoothness
- Supports quieter and smoother engine operation
- Helps stabilise the oil film under high-load conditions
- May support easier cold starts
- Supports the protection of the engine, turbocharger and drivetrain components
- Does not change oil viscosity
- Free from PTFE, chlorine, chlorinated paraffins, silicone, ZDDP and heavy metals
- Safe for DPF, EGR and catalytic converters
- Protection up to 100,000 km or up to 2 years of operation
Technology
During engine operation, metal components are exposed to high pressure, elevated temperature and constantly changing lubrication conditions. In areas where the standard oil film cannot fully separate the working surfaces, increased friction and accelerated wear may occur.
KinematicGP technology activates in the highest-load zones. Active nanostructures create an adaptive protective layer called DLGCâ„¢ Diamond-Like Graphene Coating, helping to reduce metal-to-metal contact, smooth out micro-irregularities and support the protection of friction surfaces.
The formula also uses GLC60 structures, which act like microscopic nano-bearings. They support the reduction of operating resistance, vibration and noise while helping maintain more stable lubrication conditions.
Possible benefits
Depending on the technical condition of the vehicle, oil type and operating conditions, KinematicGP GP52 Long Life may support:
- Quieter engine operation
- Smoother drivetrain performance
- Reduced friction and wear
- Improved throttle response
- Reduced vibration and noise
- Easier cold starts
- More stable operation under load
- Reduced oil consumption
- Improved protection in urban driving and Start-Stop systems
- Lower vehicle operating costs
Actual results may vary depending on engine condition, driving style, oil type and operating conditions.
Application
Suitable for use in:
- Petrol engines
- Diesel engines
- LPG engines
- Turbocharged engines
- Manual gearboxes
- Drive axles
- Differentials
- Agricultural and industrial machinery
Compatible with mineral, semi-synthetic and synthetic oils, including low-viscosity oils such as 0W-16, 0W-20 and 0W-30.
Do not use in
Do not use the product in:
- Automatic transmissions
- CVT gearboxes
- LSD mechanisms
- Viscous couplings
- Screw compressors
- Systems using non-metallic friction pairs
Directions for use
Engine:
Use 10 ml of product for 3–7 litres of oil.
For units with mileage above 110,000 km or systems containing more than 7 litres of oil, it is recommended to use 20 ml of product.
Application:
- Warm up the engine to operating temperature.
- Add the product to the oil.
- Leave the engine idling for approximately 30 minutes.
- Use the vehicle normally.
After application, do not change the oil for the first 1,600 km. For best results, apply after an oil change. Do not mix with other oil additives.
Specification
Manufacturer: KinematicGP
Model: GP52 Long Life
Capacity: 10 ml
Product type: Engine and gear oil additive
Technology: Graphene nanotechnology, nano-bearing, DLGCâ„¢, GLC60
Protection period: Up to 100,000 km or up to 2 years of operation
Application: Engines, manual gearboxes, drive axles, differentials
Compatibility: Mineral, semi-synthetic, synthetic and low-viscosity oils
Short listing description
KinematicGP GP52 Long Life is an advanced oil additive using graphene nanotechnology and nano-bearing structures. It supports friction reduction, protection of friction surfaces and smoother, quieter engine operation. The product does not change oil viscosity and is safe for DPF, EGR and catalytic converters. Provides long-lasting protection for up to 100,000 km or up to 2 years of operation.
KinematicGP GP52 Long Life is an advanced engine and gear oil additive developed to reduce friction, limit wear and provide long-lasting protection for components operating under high load.
The formula uses graphene nanotechnology and active nano-bearing structures to support the protection of friction surfaces in engines, manual gearboxes, drive axles and differentials. The oil acts as a carrier, while the protective layer forms directly on metal surfaces, especially in areas exposed to the highest friction, pressure and temperature.
GP52 Long Life does not thicken the oil, dilute it or change its viscosity grade. It can be used with mineral, semi-synthetic and synthetic oils, including modern low-viscosity oils.
Key product features
- Supports friction reduction between metal components
- Helps limit mechanical wear of friction surfaces
- Creates an adaptive DLGCâ„¢ protective layer
- May improve engine running smoothness
- Supports quieter and smoother engine operation
- Helps stabilise the oil film under high-load conditions
- May support easier cold starts
- Supports the protection of the engine, turbocharger and drivetrain components
- Does not change oil viscosity
- Free from PTFE, chlorine, chlorinated paraffins, silicone, ZDDP and heavy metals
- Safe for DPF, EGR and catalytic converters
- Protection up to 100,000 km or up to 2 years of operation
Technology
During engine operation, metal components are exposed to high pressure, elevated temperature and constantly changing lubrication conditions. In areas where the standard oil film cannot fully separate the working surfaces, increased friction and accelerated wear may occur.
KinematicGP technology activates in the highest-load zones. Active nanostructures create an adaptive protective layer called DLGCâ„¢ Diamond-Like Graphene Coating, helping to reduce metal-to-metal contact, smooth out micro-irregularities and support the protection of friction surfaces.
The formula also uses GLC60 structures, which act like microscopic nano-bearings. They support the reduction of operating resistance, vibration and noise while helping maintain more stable lubrication conditions.
Possible benefits
Depending on the technical condition of the vehicle, oil type and operating conditions, KinematicGP GP52 Long Life may support:
- Quieter engine operation
- Smoother drivetrain performance
- Reduced friction and wear
- Improved throttle response
- Reduced vibration and noise
- Easier cold starts
- More stable operation under load
- Reduced oil consumption
- Improved protection in urban driving and Start-Stop systems
- Lower vehicle operating costs
Actual results may vary depending on engine condition, driving style, oil type and operating conditions.
Application
Suitable for use in:
- Petrol engines
- Diesel engines
- LPG engines
- Turbocharged engines
- Manual gearboxes
- Drive axles
- Differentials
- Agricultural and industrial machinery
Compatible with mineral, semi-synthetic and synthetic oils, including low-viscosity oils such as 0W-16, 0W-20 and 0W-30.
Do not use in
Do not use the product in:
- Automatic transmissions
- CVT gearboxes
- LSD mechanisms
- Viscous couplings
- Screw compressors
- Systems using non-metallic friction pairs
Directions for use
Engine:
Use 10 ml of product for 3–7 litres of oil.
For units with mileage above 110,000 km or systems containing more than 7 litres of oil, it is recommended to use 20 ml of product.
Application:
- Warm up the engine to operating temperature.
- Add the product to the oil.
- Leave the engine idling for approximately 30 minutes.
- Use the vehicle normally.
After application, do not change the oil for the first 1,600 km. For best results, apply after an oil change. Do not mix with other oil additives.
Specification
Manufacturer: KinematicGP
Model: GP52 Long Life
Capacity: 10 ml
Product type: Engine and gear oil additive
Technology: Graphene nanotechnology, nano-bearing, DLGCâ„¢, GLC60
Protection period: Up to 100,000 km or up to 2 years of operation
Application: Engines, manual gearboxes, drive axles, differentials
Compatibility: Mineral, semi-synthetic, synthetic and low-viscosity oils
Short listing description
KinematicGP GP52 Long Life is an advanced oil additive using graphene nanotechnology and nano-bearing structures. It supports friction reduction, protection of friction surfaces and smoother, quieter engine operation. The product does not change oil viscosity and is safe for DPF, EGR and catalytic converters. Provides long-lasting protection for up to 100,000 km or up to 2 years of operation.
More Information
Manufacturer
KinematicGP
Volume
0-250ml
| Manufacturer | KinematicGP |
|---|---|
| Volume | 0-250ml |