The FMIC.Pro panel air filter is a performance replacement element designed for installation in the factory airbox. It has been developed to provide maximum airflow while maintaining effective filtration of contaminants. Thanks to the low resistance of the nanofiber filter media, the engine can draw in a greater volume of air, helping to reduce restrictions in the factory intake system. The filter is manufactured to match the dimensions of the original element, allowing direct installation in the factory airbox without modifications or additional mounting components.

The nanofiber structure combines high air permeability with effective capture of dust, fine particles and other contaminants drawn into the intake system. The fine structure of the nanofibers provides an effective balance between high airflow and an appropriate level of engine protection.

The pleated design creates numerous folds that significantly increase the filtration surface area. The larger surface allows a high volume of air to pass freely through the filter. The filter media is additionally reinforced with steel mesh, which helps maintain its shape and protects it against deformation. FMIC.Pro panel air filters are suitable for standard road cars as well as performance and modified vehicles.

• fits the factory airbox
• no modification of the intake system required
• very low airflow resistance
• high air permeability
• nanofiber filter media
• large filtration surface area
• effective contaminant capture
• steel mesh reinforced construction
• washable and reusable

The filter is designed for repeated use and requires periodic cleaning. Maintenance intervals should be adjusted to the conditions in which the vehicle is operated. When driving in particularly dusty environments, the filter should be inspected and cleaned more frequently.

Regular removal of accumulated contaminants helps maintain proper airflow and filtration efficiency over a long service life. Cleaning products intended for performance air filters should be used. After cleaning, the filter media should be evenly coated with a thin layer of suitable filter oil. Avoid excessive oiling, as this may restrict airflow or contaminate components within the intake system.

Compatible with:

BMW 330d F30/F31 3.0 N57 2012
BMW 330d 3.0 N57 2013-2018
BMW 330d F30/F31 3.0 N57 2019
BMW 330d GT F34 3.0 N57 2014-2020
BMW 335d F30/F31 3.0 N57 2012
BMW 335d 3.0 N57 2013-2018
BMW 335d F30/F31 3.0 N57 2019
BMW 335d GT F34 3.0 N57 2014-2020

BMW 430d F32/F33/F36 3.0 N57 2013-2020
BMW 435d F32/F33/F36 3.0 N57 2013-2020

BMW 530d 3.0 N57 2012-2015
BMW 530d F10/F11 3.0 N57 2016-2017
BMW 530d GT F07 3.0 N57 2012 - 258 KM
BMW 530d GT F07 3.0 N57 2013-2017
BMW 535d 3.0 N57 2011-2016
BMW 535d F10/F11 3.0 N57 2017
BMW 535d GT F07 3.0 N57 2012-2017
BMW 535d xDrive F10/F11 3.0 N57 2014-2016
BMW M550d F10/F11 3.0 N57 2012-2017

BMW 640d F06/F12/F13 3.0 N57 2011-2018
BMW 640d G32 3.0 B57 2019-2020
BMW 640d Gran Coupe F06 3.0 N57 2012-2018

BMW 730d 3.0 N57 2012 - od 08/2012
BMW 730d 3.0 N57 2013-2014
BMW 730d F01/F02 3.0 N57 2015
BMW 740d 3.0 N57 2012 - od 08/2012
BMW 740d 3.0 N57 2013-2014
BMW 740d F01/F02 3.0 N57 2015
BMW 740Ld xDrive F02 3.0 N57 2015
BMW 750d F01/F02 3.0 N57 2012-2015

BMW X3 xDrive30d F25 3.0 N57 2011-2017
BMW X3 xDrive35d F25 3.0 N57 2011-2017

BMW X4 F26 3.0 N57 2014-2018

BMW X5 3.0 N57 2016-2018
BMW X5 M50d 3.0 N57 2012-2013
BMW X5 M50d F15 3.0 N57 2014-2018
BMW X5 xDrive30d F15 3.0 N57 2013-2018
BMW X5 xDrive35d F15 3.0 N57 2014-2015
BMW X5 xDrive40d F15 3.0 N57 2013-2018

BMW X6 3.0 N57 2018-2019
BMW X6 30d G06 3.0 B57 2020
BMW X6 M50d E71/F16 3.0 N57 2012-2019
BMW X6 M50d G06 3.0 B57 2020
BMW X6 xDrive30d F16 3.0 N57 2014-2018
BMW X6 xDrive40d F16 3.0 N57 2015-2018