The FMIC.Pro panel air filter is a performance replacement element designed for installation in the factory airbox. It has been developed to provide maximum airflow while maintaining effective filtration of contaminants. Thanks to the low resistance of the nanofiber filter media, the engine can draw in a greater volume of air, helping to reduce restrictions in the factory intake system. The filter is manufactured to match the dimensions of the original element, allowing direct installation in the factory airbox without modifications or additional mounting components.

The nanofiber structure combines high air permeability with effective capture of dust, fine particles and other contaminants drawn into the intake system. The fine structure of the nanofibers provides an effective balance between high airflow and an appropriate level of engine protection.

The pleated design creates numerous folds that significantly increase the filtration surface area. The larger surface allows a high volume of air to pass freely through the filter. The filter media is additionally reinforced with steel mesh, which helps maintain its shape and protects it against deformation. FMIC.Pro panel air filters are suitable for standard road cars as well as performance and modified vehicles.

• fits the factory airbox
• no modification of the intake system required
• very low airflow resistance
• high air permeability
• nanofiber filter media
• large filtration surface area
• effective contaminant capture
• steel mesh reinforced construction
• washable and reusable

The filter is designed for repeated use and requires periodic cleaning. Maintenance intervals should be adjusted to the conditions in which the vehicle is operated. When driving in particularly dusty environments, the filter should be inspected and cleaned more frequently.

Regular removal of accumulated contaminants helps maintain proper airflow and filtration efficiency over a long service life. Cleaning products intended for performance air filters should be used. After cleaning, the filter media should be evenly coated with a thin layer of suitable filter oil. Avoid excessive oiling, as this may restrict airflow or contaminate components within the intake system.

Compatible with:

Land Rover Defender 90 4.4 V8 P 2024-2025

Land Rover Defender 90 5.0 V8 P 2022-2026

Land Rover Defender 110 4.4 V8 P 2024-2026

Land Rover Defender 110 5.0 V8 P 2022-2026

Land Rover Defender 130 5.0 V8 P 2023-2026

Land Rover Discovery 3.0 V6 P 2017-2020

Land Rover Discovery 3.0 R6 P 2021-2026

Land Rover Discovery IV 3.0 V6 P 2013-2017

Land Rover Discovery IV 5.0 V8 P 2010-2014

Land Rover Discovery V 2.0 R4 D 2016-2017

Land Rover Discovery V 3.0 V6 D 2016-2022, 2024-2025

Land Rover Discovery V 3.0 V6 P 2017-2022

Land Rover LR4 3.0 V6 P 2014-2016

Land Rover LR4 5.0 V8 P 2010-2013

Land Rover Range Rover 3.0 V6 P 2014-2019

Land Rover Range Rover 3.0 R6 P 2020-2021

Land Rover Range Rover 5.0 V8 P 2010-2022

Land Rover Range Rover III 4.4 V8 D 2010-2012

Land Rover Range Rover III 5.0 V8 P 2009-2012

Land Rover Range Rover IV 3.0 V6 D 2012-2021

Land Rover Range Rover IV 3.0 V6 P 2014-2015, 2019-2021

Land Rover Range Rover IV 4.4 V8 D 2012-2018

Land Rover Range Rover IV 5.0 V8 P 2012-2021

Land Rover Range Rover Sport 3.0 V6 P 2014-2019

Land Rover Range Rover Sport 3.0 R6 P 2019-2022

Land Rover Range Rover Sport 5.0 V8 P 2009-2020, 2022

Land Rover Range Rover Sport II 3.0 V6 D 2013-2022

Land Rover Range Rover Sport II 3.0 V6 P 2013-2022

Land Rover Range Rover Sport II 4.4 V8 D 2015-2018

Land Rover Range Rover Sport II 5.0 V8 P 2013-2022