FCST Lift Pump Brackets All Depths Radium Engineering

SKU USA-RAD-20-0214

  On demand

 

FCST Lift Pump Brackets All Depths Radium Engineering

FCST LIFT PUMP MOUNTS
The mounts below are specific to the following FCSTs ONLY: 20-014X-XX, 20-049X-XX, 20-069X-XX, and 20-099X-XX. NOTE: Lift pump mounting information for the newer FCST-X (20-199X-XX) can be found towards the bottom of this page.
The kits below include 2 laser cut polished stainless steel brackets.
NOTE: The lift pump mounts included with the purchase of a FCST are designed for fuel cells no deeper than 9" (229mm). This is measured from the underside of the fill plate to the bottom of the lift pump filter sock. 

20-0214 FCST LIFT PUMP MOUNTS, ALL DEPTHS
These lift pump mounts permit an additional 8" (203mm) over the standard mounts provided with the FCST. They will properly place the lift pump at a fuel cell depth up to 17" (432mm). If modifying to a specific fuel cell depth, simply cut to length using a band saw, cut-off wheel, etc.

NOTE: Longer hose and/or wiring may be necessary

More Information

Manufacturer Radium EngineeringRadium Engineering
Write Your Own Review
You're reviewing: FCST Lift Pump Brackets All Depths Radium Engineering
Loading...

You submitted your review for moderation.