EWP®80 Alloy Kit – Remote Electric Water Pump (12V)

The EWP^®80 Alloy Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models and can be installed on the bottom radiator hose of most vehicles equipped with naturally aspirated engines up to two litres (2000cc).

The revolutionary, Australian-designed EWP^®80 Alloy is made from lightweight aluminium which offers great thermal conductivity and incorporates a ceramic faced seal for long-life durability.

With a maximum flow rate of 90 l/min (24 g/min), 35mm (13/8”) inlet and outlet, it arrives in a magnificent matt-black, powder-coated finish and offers the same high class, performance, compactness, and style you have come to expect from Davies Craig.

Kit Includes

• 1x EWP®80 Alloy (12V)
• 1x EWP Basic Wiring Harness
• 2x Hose Clamps
• 1x RED - Wire Joiner
• 1x RED - 6mm Ring Terminal
• 1x RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection
• 1x SCREW - SELF TAP 8X3/8 BZ
• 1x Installation Instructions

Technical specifications

• Operating voltage: 13.8V DC / 16V MAXIMUM
  
• Max current: 7.5A @ 13V
  
• Flow rate (max): 90 L/min (23.8 US gal/min) @ 0 kPA
  
• Maximum head height: 5.2m (17ft 0.72in)
  
• Operating temp.: -40° to 120°C (-40° to 248°F)
  
• Fluid temperatures: -40°C to 120°C (-40°F to 248°F)
  
• Pump weight: 1025 grams (2.26 lb)
  
• Motor type: Brushed DC Motor
  
• Body material: Aluminium
  
• Burst pressure: 500 kPa (72.52 psi)
  
• Inlet & outlet: 35mm (1 3/8 in) Push on barb
  
• Hose fitment: 32mm to 38mm (1¼” to 1½”)
  
• Hose fitment with 3mm Sleeve DC8510 *Not included: 41mm to 44mm (1⅝” to 1¾”)
  
• Hose fitment with 6mm Sleeve DC8511 *Not included: 47mm to 50mm (1⅞” to 2”)