EWP®115 Alloy Kit – Remote Electric Water Pump (12V)

The EWP^®115 (115 litres per minute) is suitable for small, medium, large, high-performance and 4WD vehicles. It improves engine cooling control and capacity while helping deliver more power and torque, with the potential for improved fuel economy.

A practical alternative to a mechanical belt-driven water pump or fitted as an auxiliary pump. Mechanical pumps run directly off the engine and sap power. The EWP^®115 is hardwired into your electrical system, bypassing the engine and potentially releasing up to an additional 10 kW (13 hp). Our EWP range is also extensively used in intercooler applications.

Kit Includes

• 1x EWP®115 Alloy 12V
• 1x EWP® Basic Wiring Harness
• 2x Hose Clamps
• 1x RED – Wire Joiner
• 1x RED – 6mm Ring Terminal
• 1x RELAY – 12V 40 Amp 5 Pin W/ Resistor Protection
• 1x SCREW – SELF TAP 8X3/8 BZ

Technical specifications

• Voltage: 12 Volt Pump
  
• Operating voltage: 3V DC to 15V DC
  
• Maximum current: 10A @ 13V
  
• Flow rate (max): 139 L/min (36.7 US gal/min) @ 13V DC
  
• Operating temp.: -40° to 120°C (-40° to 248°F)
  
• Pump design: Clockwise centrifugal with volute chamber
  
• Pump weight: 920 grams (2.03 lb)
  
• Pump material: Aluminium (powder coated)
  
• Burst pressure: 500 kPa (72.5 psi)
  
• Seal: Ceramic face seal
  
• Self Priming: No, none of our pumps are self-priming
  
• Fits hose sizes: 35mm to 51mm (1⅜” to 2”) Inlet: -16AN (12) Outlet: -16AN (12)
  
• Push-On fitting size:
  EWP Inlet & Outlet 38mm
  
  • with 3mm Sleeve (DC8510) 44mm
  • with 6mm Sleeve (DC8511) 51mm