EWP®150 Alloy Kit – Remote Electric Water Pump (12V)

The world’s first universal-fit, automotive Electric Water Pump goes one better with the EWP^®150. Suitable for all makes and models – will excel on large six-cylinder engines, V8 engines, heavy duty 4WDs and most engines over 400 HP.

Upgrade your cooling system with the Davies Craig EWP^®150 Alloy Electric Water Pump. Designed for remote mounting, it suits high-output, turbocharged, supercharged and modified engines that generate excessive heat, as well as intercooler applications.

The compact EWP^®150 Alloy features -AN16 ORB internal inlet and outlet fittings for clean, screw-in installations. It can complement or replace the factory mechanical water pump to improve coolant temperature control and help free up engine power.

Kit Includes

• 1x EWP®150 Alloy (12V)
• 1x EWP® Basic Wiring Harness (with 10amp fuse)
• 2x Hose Clamps
• 1x Red Wire Joiner
• 1x Red 6mm Ring Terminal
• 1x Relay – 12V 40 Amp 5 Pin (with resistor protection)
• 1x Self-tapping screw 8x3/8 BZ

Technical specifications

• Operating voltage: 3V DC to 15V DC
  
• Maximum current: 10A @ 13V
  
• Flow rate (max): 162 L/min (42.8 US gal/min) @ 13V DC
  
• Operating temp.: -40° to 120°C (-40° to 248°F)
  
• Pump design: Clockwise centrifugal with volute chamber
  
• Pump weight: 1,170 grams (2.6 lb)
  
• Pump material: Aluminium (Powder Coated)
  
• Burst pressure: 500 kPa (72.5 psi)
  
• Seal: Ceramic face seal
  
• Self Priming: No, none of our pumps are self-priming
  
• Fits hose sizes: 35mm to 51mm (1.38” to 2”)
  
• Internal Fitting: Inlet & Outlet: -16AN ORB
  
• Push-On fitting size:
  EWP Inlet & Outlet 38mm
  
  • with 3mm Sleeve (DC8510) 44mm
  • with 6mm Sleeve (DC8511) 51mm