EWP®140 (Black) Kit – Remote Electric Water Pump (12V)

Turbocharge your engine cooling with the Davies Craig EWP^®140 alloy Electric Water Pump. Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat.

The EWP^®140 configuration mirrors the highly successful EWP^®80 which offers a numerous selection of attachment options, including elbow and straight adaptors. This rugged alloy hi-flow pump increases power and improves coolant temperature control. By removing parasitic power losses, the EWP^®140 releases up to 10kW (13hp).

Kit Includes

• 1x EWP®140 (Black) - ALLOY PUMP 12v Assembly
• 1x RED - Wire Joiner - R1C
• 1x SCREW - SELF TAP 8X3/8 BZ
• 1x RED - 6mm Ring Terminal - R1-6
• 12x 5x12 Flanged Hex Set Screw Zinc Silver (155207)/BZ
• 1x RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection
• 1x Adaptor Alloy 90° 38mm (1½”) *Black
• 1x Adaptor Alloy Straight 38mm (1½”) *Black
• 2x EWP ADAPTOR O-RING
• 2x HOSE CLAMP (WD9 40-60 W2) EWP
• 1x EWP BASIC PUMP LOOM (with 10amp Fuse)

Technical specifications

• Voltage: 12 Volt Pump
  
• Operating voltage: 3V DC to 15V DC
  
• Maximum current: 10A @ 13V
  
• Flow rate (max): 147 L/min (38.8 US gal/min) @ 13V DC
  
• Operating temp.: -40° to 120°C (-40° to 248°F)
  
• Pump design: Clockwise centrifugal with volute chamber
  
• Pump weight: 1,226 grams (2.7 lb)
  
• Pump material: Aluminium (Powder Coated)
  
• Burst pressure: 500 kPa (72.5 psi)
  
• Seal Ceramic: face seal
• Self Priming: No, none of our pumps are self-priming
  
• Fits hose sizes: 35mm to 51mm (1⅜” to 2”)