EWP®115 Nylon Combo – Remote Electric Water Pump & Controller (12V)

Take total control of your engine cooling with the Davies Craig EWP^®115 Nylon Electric Water Pump and LCD EWP^®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic^® Fan.

Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP^®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP^®/Fan Digital Controller, the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.

Kit Includes

• 1x EWP®115 - NYLON 12V Assembly
• 4x HOSE CLAMP
• 1x Wiring Harness - EWP & Fan Controller
• 1x EWP/Fan Digital Controller
• 1x Adapter - Nylon - In Line, 35mm (2 x 1/4" NPT)* *As of Sept 2021 the inline adapter changes to 38mm
• 1x 1/4" NPT Nylon - Bung
• 1x U-Bracket & Mounting Plate (For DC8002)
• 1x SCREW – SELF TAP 8X3/8 BZ
• 1x BLUE 6mm Ring Terminal - B2-6
• 1x Sensor Thermal - coolant temp - 1/4" NPT thread

Technical specifications

EWP®115 NYLON PUMP

• Operating voltage: 3V DC to 15V DC
  
• Maximum current: 10A @ 13V
  
• Flow rate (max): 139 L/min
  
• Operating temp.: -40° to 120°C
  
• Pump design: Clockwise centrifugal
  
• Pump weight: 920 grams (2.3 lb)
  
• Pump material: Nylon 66, 30% GF
  
• Burst pressure: 500 kPa (72.5 psi)
  
• Seal: Ceramic face seal
  
• Self Priming: No
  
• Fits hose sizes: 35mm to 51mm

LCD DIGITAL CONTROLLER

• Voltage range: 12V DC to 29V DC
  
• Display LCD size: 64.6mm x 55.6mm
  
• Maximum current: 12 Amps
  
• Targeted temps: 40°C to 110°C
  
• Fan cut-in temp.: +3°C above set
  
• Shutdown overrun: 3 mins or -10°C
  
• Sensor type: Thermister in housing
  
• Weight: 100 grams (3.5 oz)
  
• Dimensions (LxWxD): 98 x 95 x 25 mm
  
• Memory: Set & targeted temp
  
• Indicators: Temp, Power, EWP, Fan, Error