Upgrade your cooling system with the EWP^®150 Alloy Electric Water Pump (24V) — a high-flow, remote-mount solution engineered for performance vehicles that demand superior temperature control.

Delivering a massive open flow rate of 162 litres per minute (42.8 g/min), it is designed for high horsepower, turbocharged, supercharged and modified engines. The EWP^®150 efficiently manages excessive heat while also supporting intercooler applications. By reducing the load on your engine compared to a traditional mechanical pump, it helps free up power and improve overall efficiency.

The EWP^® Combo Configuration is the ideal solution for a full electric water pump conversion. This setup allows you to remove or disengage the mechanical belt-driven water pump and, in most applications, eliminate the factory mechanical thermostat — delivering precise, fully controlled cooling system performance.

By converting to an EWP^® Combo system, you gain optimal temperature management, improved efficiency, and complete control over your engine’s cooling strategy.

Kit Includes

• 1x EWP®150 Alloy (24V)
• 1x EWP®/Fan Digital Controller & Mounting Plate + Bracket
• 1x Sensor Thermal - coolant temp - ¼" NPT thread
• 1x Adaptor - Nylon - In Line, 38mm (2 x 1/4" NPT)
• 1x 1/4" NPT Nylon - Bung
• 1x Wiring Harness
• 4x Hose Clamps
• 1x SCREW - SELF TAP 8X3/8 BZ
• 1x BLUE 6mm Ring Terminal

Technical specifications

EWP®150 ALLOY PUMP (24V)

• Operating voltage 20V DC to 27V DC
  
• Maximum current 5.5A @ 24V
  
• Flow rate (max) 162 L/min (42.8 gal/m) @ 24V DC
  
• Operating temp. -40° to 120°C (-40° to 248°F)
  
• Pump design Clockwise centrifugal with volute chamber
  
• Pump weight 1,170 grams (2.6 lb)
  
• Pump material Aluminium (Powder Coated)
  
• Burst pressure 500 kPa (72.5 psi)
  
• Internal Fitting -16AN ORB
  
• Fits hose sizes 35mm to 51mm (1.38” to 2”)
  
• Push-on size
  38mm
  
  • with 3mm Sleeve (DC8510) 44mm
  • with 6mm Sleeve (DC8511) 51mm

LCD DIGITAL CONTROLLER

• Voltage range 12V DC to 29V DC
  
• Display LCD size 64.6mm x 55.6mm
  
• Maximum current 12 Amps
  
• Targeted temps 40°C to 110°C
  
• Fan cut-in temp. +3°C above set
  
• Shutdown overrun 3 mins or -10°C
  
• Sensor type Thermister in housing
  
• Weight 100 grams (3.5 oz)
  
• Dimensions (LxWxD) 98 x 95 x 25 mm
  
• Memory Set & targeted temp
  
• Indicators Temp, Power, EWP, Fan, Error